General Detail
ADSS cable is a cable that is twisted into a loose tube. The fibers, 250μm, are positioned inside the loose tube made of high-modulus plastic. The tube is filled with a water-blocking compound. The tube (and filler) is twisted around an FRP (Fiber Reinforced Plastic) as a non-metallic central strength member into a compact and circular core. After the core is filled with the filler compound, the cable is covered with a thin PE inner sheath. An Aramid yarn layer is then applied over the inner sheath as a strength member, and the cable is finished with an outer PE sheath (anti-tracking).
- Product Features
- Product Specification
• Can be installed without shutting down power.
• Excellent performance. Maximum inductive voltage at the jacket operating point can reach 25kV.
• Lightweight and small diameter reduce the load caused by ice and wind, as well as the load on towers and back supports.
• Large span length, with the largest span exceeding 200m.
• Good performance in tensile strength and temperature.
| Max. load under installation | KN ≤8,6 |
| Max. load under operation | Nomor ≤4,2 |
| Crush (Long Term) | N/10cm 500 |
| Crush (Short Term) | N/10cm 2000 |
| Min. Bend Radius(Dynamic) | mm20D |
| Min. Bend Radius(Static) | mm10D |
| Installation Temperature | Suhu: -20~+60 |
| Operating Temperature | Suhu: -40~+70 |
| Storage Temperature | Suhu: -40~+70 |
English 
Bahasa Indonesia